No hay comentarios de productos.
Setup Menu
To change the default setting, press the � / ¤ Navigation Buttons e until the desired choice is highlighted, and then press the Enter Button d. Note that the circle for your choice will fill in, and the menu will return to the default listings. If you wish to change the default to a language other than English, Spanish or French, press the � / ¤ Navigation Buttons e until the �Other� line on the bottom is highlighted. Consult the Language Codes lists on page 30 for the desired language. Press the Enter Button d, and then enter the four-digit code from the list using the Numeric Keys o. Although your selection will be entered, the word �Other� will appear on the default list. Note that when a default language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one preprogrammed into the disc itself. (Typically, that default will be English for discs sold in Region 1, but the selection will vary at the discretion of the disc�s producer.) Although the default will set the language that will be used when a disc is first put into play, the language may easily be changed at any time by using the Audio Button a. See page 25 for more information. If you have no other changes to make after setting this default, press the Menu Button ` to remove the Setup Menu from the screen, or press the Play Button g/@ to begin or resume playback. Subtitle Language Selection The Subtitle Language option sets the default choice for the language that will be displayed when subtitles are turned on during DVD playback. To select the Subtitle Language default, you must be viewing the Setup Menu (Figure 1), which is available by pressing the Menu Button ` while the unit is in the Stop Mode. At the Setup menu, press the ¤ Navigation Button e until the Subtitle Language option is highlighted. To change the default Subtitle Language, press the � Navigation Button e and note that the list of system defaults will be replaced with a list of the available options, as shown in Figure 3. The current subtitle language choice will be indicated by a filled-in circle on the list on the right side of the screen.
Figure 1 To navigate through the settings on the screen, use the � / ¤ Navigation Buttons e to scroll up or down through the list of settings or the list of options. Press the � / � Navigation Buttons to move back and forth between the list of settings and the list of options for those settings. To choose a specific option, use the � / ¤ Navigation Buttons e until it is highlighted. Press the Enter Button d to select the choice. When a selection is made, you may confirm the choice by checking to see that a black dot fills the �radio button� circle next to the choice. This filled circle, not the highlighted option, is the active choice. Audio Language Selection The Audio Language option sets the default choice for the language that will be played from a DVD disc. To select the language default, you must be viewing the Setup Menu (Figure 1), which is available by pressing the Menu Button ` while the unit is in the Stop mode. Audio Language Selection is the first option, so it will automatically be highlighted in dark blue when the Setup Menu is displayed. To change the default Language, press the � Navigation Button e and note that the list of system defaults will be replaced with a list of the available options, as shown in Figure 2. The current language choice will be indicated by a filled-in circle on the list on the right side of the screen.
Figure 3 To change the default setting, press the � / ¤ Navigation Buttons e until the desired choice is highlighted, and then press the Enter Button d. Note that the circle for your choice will fill in, and the menu will return to the default listings. If you wish to change the subtitle default to a language other than English, Spanish or French, press the � / ¤ Navigation Button e until the �Other� line on the bottom is highlighted. Consult the Language Codes list on page 30 for the desired language. Press the Enter Button d, and then enter the four-digit code from the list using the Numeric Keys o. Although your selection will be entered, the word �Other� will appear on the default list. Note that when a default subtitle language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one preprogrammed into the disc itself. (Typically, that default will be English for discs sold in Region 1, but the selection will vary at the discretion of each disc�s producer.) Although the default will set the language that will be used when the disc is first put into play, the language may easily be changed at any time by using the Subtitle Button 31 . See page 25 for more information. If you have no other changes to make after setting this default, press the Menu Button ` to remove the Setup Menu from the screen, or press the Play Button g/@ to begin or resume playback.
Figure 2
16 SETUP MENU
